Airology are experts in Technology Cleanrooms.

We produce bespoke quality cleanrooms for technology manufacturers, making the best use of space to ensure sterile, controlled environments for procedures and preparation.

Electronics manufacturers use cleanrooms within their facilities to ensure the quality and functionality of sensitive components, such as microprocessors and circuit boards. By integrating a cleanroom into the flow of production, companies can reduce the need for outsourcing and meet higher demand for their products. 

Why Electronics manufacturers need a cleanroom

When making circuit boards, microprocessors or other electronic components, any dust or dirt that makes its way into the component can damage parts or impact the conductivity. This is because the materials these components are made from can be highly reactive. As such, electronics should be built in a controlled environment provided by a cleanroom to ensure a consistent, functional product.

Electronics Cleanroom Classification

The classification of cleanrooms determines the number of airborne particles permitted per cubic metre of space. There are three main classifications that we work with: ISO, GMP and FED.

All of these classify cleanrooms based on the maximum allowable concentrations (particles/cubic metre) for particles of certain sizes for each class.

ISO standards, derived from ISO 14644-1, are numbered 1 to 9, with 1 being the cleanest and 9 being similar to any other, non-ventilated room.

What are the Requirements for a Cleanroom in the Technology Industry?

Generally, technology cleanrooms require air quality control at classification ISO 8 or higher.

The requirements of your specific cleanroom project will depend on the intended use and design. For example, a circuit board cleanroom or microprocessor cleanroom may also need lighting, temperature, humidity and air pressure control, depending on the sensitivity of the materials being used. Silicone wafers that are used for microprocessors can be degraded by these environmental conditions. 

Our cleanrooms are validated by an independent inspector on completion, so you can be confident that the installation meets ISO requirements.

Printed Circuit Board Cleanroom

A printed circuit board (PCB) cleanroom is an essential facility in the electronics manufacturing industry for several critical reasons. Firstly, it ensures the integrity and reliability of electronic components and devices. Dust particles, contaminants, or even the tiniest speck of dirt can disrupt the functionality of PCBs, causing defects or failures in electronic products.

Secondly, a cleanroom provides a controlled environment that minimizes the risk of electrostatic discharge (ESD), which can damage sensitive electronic components.

Thirdly, it plays a crucial role in maintaining the quality standards required for various industries, including aerospace, medical, and automotive, where precision and consistency are paramount. In summary, a PCB cleanroom is indispensable for safeguarding product quality, preventing electronic component damage, and upholding industry-specific standards in electronic manufacturing processes.

Why work with Airology Systems for your cleanroom?

With over 25 years of experience in the cleanroom industry, we have extensive knowledge of cleanroom technology and classifications. With this knowledge and experience, we support you with the design and management of your whole cleanroom project, from initial concept to completion.

Once the design is finalised, we provide and liaise with specialists to install high-tech, high-quality solutions, creating a secure, controlled environment in your space. We are available for guidance throughout the project, by phone or email, and happy to offer advice where needed. On completion of the build, we arrange an independent validation assessment, giving you confidence that our solutions meet the specifications required.

What our customers say…

“Throughout the project Airology provided us with guidance and their expertise to ensure that the installation met our specific requirements and was completed on time. We are delighted with our state of the art Clean Room and the professional approach and support given to us by the Airology team was invaluable.”

Andrew Stringer Managing Director, Entaco Ltd

“During the initial design and build we worked closely with Airology to create a facility that will provide one of the most comprehensive GMP stability storage and testing services in Europe. Working with Airology as the principal contractor enabled us to deliver a significant building project, on-scope, on-time and on-budget.”

Mark HammondManaging Director, Intertek Melbourn Scientific

“We have used Airology extensively to install air conditioning in Grosvenor House so wanted them to handle the M & E but we also wanted a single locally based supplier for the refurbishment contract.  Airology were able to provide a comprehensive service including the raised floor, ceilings, decoration and carpeting as well as the M & E  and the project came in on budget, on time and the quality was excellent.”

Mark RobertsManaging Director, Loxton Developments Ltd

“Airology provided us with a bespoke, managed development which has allowed us to double our production output. The service and communication which we received at all stages of the project was excellent and any impact on our production was kept to an absolute minimum. Malosa Medical would definitely recommend Airology.”

Will Stewart Operations Manager, Malosa Medical

“Airology completed our installation with a high degree of professionalism and knowledge. P3 would have no hesitation in recommending the company for similar projects.”

Simon TalbotManaging Director, P3 Medical Ltd

“We would like to thank you for the way the works were carried out to a high standard with the minimum of disruption. From concept to completion your staff were very helpful and professional throughout. We would be pleased to recommend you in the future without hesitation.”

Dr SilvaPerfect Image Consultants

“The quality of the work has been to a high standard and the people who have worked on the project have been exceptional. There were some challenges to be dealt with, but as we thought the Airology team was first class at solving the problems and kept the project to time and to budget.”

Nigel SouthernRidgeway Biologicals

“I have worked with Airology for several years and always found them to be reliable and responsive in regard to the servicing and maintenance of our HVAC equipment.”

Colin Welsh Orbit Group

Other Case Studies…

Paragraf, Somersham - ISO 6 & ISO 8 Cleanrooms

They required a GMP Grade B, C and D cleanroom facility with temperature control, filtration, pressure monitoring and ventilation.

Read case study

Xeal Pharma, ISO 7 Multiroom Cleanroom, Birmingham

With a urgent requirement to expand their production facility to meet their increased demand, our client, a specialist in pharmaceutical production and distribution, requested our recommendations.

Read case study

Blink Medical / Corsa Medical, ISO 7 Cleanrooms, Solihull

We were appointed to help design and build an ISO 7 cleanroom facility to enable our client to manufacture products in house and create a quality control office to maintain their high quality standards.

Read case study

Exstent Ltd, ISO 5, ISO 6 & ISO 7 cleanroom, Tewkesbury

With a urgent requirement to expand their production facility to meet their increased demand, our client, a specialist in personalised external aortic root support, requested our recommendations.

Read case study

Automotive, ISO 7 Cleanroom, Bolton

We were appointed to design and build a cleanroom facility to enable our client to continue expanding their business and meet their growing demands by utilising their existing space more efficiently.

Read case study

Aerospace, ISO 7 and ISO 8 Cleanroom, Somerset

We were appointed to design and build a cleanroom facility along with quality review space to enable our client to continue expanding their business and meet their growing demands by utilising their existing space more efficiently.

Read case study

Testcard, ISO 8 Cleanroom, Scarborough

With an urgent requirement to expand their production facility to meet their increased demand, our client, a specialist in at-home medical testing providing immediate test results at a low cost, requested our recommendations.

Read case study

Andel Plastics Ltd, ISO 8 Cleanroom, Birmingham

With an urgent requirement to expand their production facility to meet their increased demand, our client, a specialist injection moulding and toolmaking company, requested our recommendations.

Read case study

Microsystems UK, ISO 7 Cleanroom, Warrington

Airology were appointed to design and build a cleanroom facility to enable our client to expand their business and meet their growing demands by creating a larger space for production and administration within their new premises.

Read case study

Trackwise, ISO 7 Cleanroom, Tewkesbury

We were appointed to design and build a cleanroom facility to enable our client to expand their business and meet their growing demands by creating a larger space for production.

Read case study

Always Pure Organics, ISO 8 Cleanroom, Manchester

We were appointed to help design and build an ISO 8 cleanroom facility to enable our client to manufacture products in house to maintain their high quality standards.

Read case study

Sheffield University, ISO 7 Cleanroom, Sheffield

Sheffield University required an ISO 7 cleanroom facility with temperature control and filtration to prevent contamination during testing, ensure high quality standards and efficient data analysis.

Read case study

Aerospace, Cleanroom Design, Somerset 2015

The client required an existing manufacturing space to be converted in an ISO 8 cleanroom facility with temperature control, filtration and pressure monitoring.

Read case study

Aerospace, ISO 7 and ISO 8 Cleanrooms, Somerset 2020

We were appointed to design and build a cleanroom facility to enable our client to continue expanding their business and meet their growing demands by utilising their existing space more efficiently.

Read case study